Common Epoxy Flooring Problems and How to Fix Them in San Antonio: A Comprehensive Guide

Wes Vollmer
Apr 21
19 min read

If you're considering epoxy flooring for your home or business in San Antonio, it's essential to know the common issues that can arise and how to address them. Epoxy floors can be a fantastic choice due to their durability and aesthetic appeal, but they aren't without their problems. This guide will walk you through the typical challenges you might face with epoxy flooring and provide straightforward solutions to help you keep your floors looking great for years to come.

Key Takeaways

Peeling and lifting can often be fixed with proper surface preparation and reapplication of epoxy.
Bubbles and blisters usually stem from trapped air; identifying the source is key to fixing them.
Discoloration can often be cleaned or sealed to prevent future staining.
Regular maintenance is crucial to prolonging the life of your epoxy flooring.
Choosing quality materials and professional installation can save you from many common problems.

Identifying Common Epoxy Flooring Issues

Epoxy floors, while known for their durability, aren't immune to problems. Spotting these issues early can save you a lot of hassle and money down the road. It's all about knowing what to look for. Let's get into some common problems.

Peeling and Lifting

Peeling and lifting are probably the most obvious signs that something's wrong. This usually shows up as the epoxy separating from the concrete underneath. You might notice edges curling up or entire sections detaching. It's not just ugly; it can also be a safety hazard. If you see this happening, it's important to address it quickly to prevent further damage. It can be caused by moisture, poor prep, or the wrong type of epoxy for the environment.

Bubbles and Blisters

Bubbles and blisters are those annoying little bumps that pop up on the surface of your epoxy floor. They're caused by trapped air or moisture during the application process. They might seem small at first, but they can weaken the epoxy over time. If left unchecked, these can lead to cracks and other damage. Identifying the source of the air or moisture is key to fixing this issue. Sometimes, it's as simple as the concrete not being properly sealed before the epoxy was applied. Other times, it's due to temperature fluctuations during the curing process. Proper installing an epoxy floor is key to avoiding this issue.

Discoloration and Staining

Discoloration and staining can really mess with the look of your epoxy floor. Over time, you might notice that the floor isn't as vibrant as it used to be, or that certain areas are stained from spills or chemicals. Some epoxies are more prone to staining than others, especially if they're not properly sealed. Regular cleaning can help, but sometimes, the damage is already done. Factors like UV exposure can also cause discoloration, leading to a yellowing effect. Choosing the right type of epoxy and using sealants can help prevent this.

It's important to remember that epoxy floors, like any other flooring material, require regular maintenance to keep them looking their best. Ignoring these common issues can lead to more serious problems down the line, so it's always better to address them early on.

Understanding the Causes of Epoxy Flooring Problems

Epoxy floors are tough, but they aren't immune to issues. Knowing what causes these problems can help you prevent them in the first place. Let's look at some common culprits.

Improper Surface Preparation

This is huge. If you don't prep the surface right, the epoxy won't stick. It's like trying to paint a wall without cleaning it first – the paint will peel. Surface prep usually involves grinding or etching the concrete to create a porous surface. This gives the epoxy something to really grab onto. It also means cleaning the floor like your life depends on it. Any oil, grease, or old coatings left behind will mess things up.

Environmental Factors

Temperature and humidity play a big role. If it's too cold, the epoxy might not cure properly. Too humid, and you could end up with a cloudy or sticky finish. Direct sunlight during application can also cause problems, like rapid curing or bubbling. Here's a quick guide:

Temperature: Ideally between 60-80°F (15-27°C)
Humidity: Keep it below 75%
Sunlight: Avoid direct exposure during application

I remember this one time, we were doing an epoxy floor in the summer, and it was crazy humid. We didn't pay enough attention, and the finish was a total disaster. It was all cloudy and never fully hardened. We had to redo the whole thing. Lesson learned: always check the weather forecast!

Low-Quality Materials

Not all epoxy is created equal. Cheap epoxy might save you money upfront, but it can lead to problems down the road. It might not be as durable, or it could be more susceptible to things like staining or scratching. Using quality epoxy is an investment that pays off in the long run. It's like buying a cheap tool – it might work for a little while, but it'll probably break when you really need it. Always check the specs and reviews before you buy.

Preventive Measures for Epoxy Flooring

Regular Maintenance Practices

Keeping your epoxy floor in tip-top shape doesn't have to be a huge chore. Think of it like taking care of a car – a little regular attention goes a long way. Regular sweeping is your first line of defense. Get rid of any loose dirt, grit, or debris that could scratch the surface over time. Then, mop with a mild soap and water solution. Harsh chemicals are a no-no; they can dull or even damage the epoxy.

Sweep at least once a week, or more often in high-traffic areas.
Use a pH-neutral cleaner specifically designed for epoxy floors.
Always rinse thoroughly with clean water to remove any soap residue.

I've found that a microfiber mop works best for cleaning epoxy floors. It picks up dirt effectively without being too abrasive. Plus, it's easy to wring out, so you don't end up with puddles of water on your floor.

Choosing the Right Installation Conditions

Epoxy doesn't like extremes. Temperature and humidity play a big role in how well it cures and bonds to the underlying surface. Ideally, you want to install epoxy when the temperature is between 60°F and 80°F, and the humidity is below 75%. If it's too cold, the epoxy might not cure properly, leading to a soft, sticky finish. Too humid, and you could end up with bubbles or cloudiness. Paying attention to these details during epoxy installation can save you headaches later.

Check the weather forecast before you start your project.
Use a dehumidifier or heater to control the environment, if necessary.
Make sure the concrete slab is completely dry before applying the epoxy.

Using Quality Products

Skimping on epoxy is like using cheap paint – you'll probably regret it later. High-quality epoxy resins and hardeners are worth the investment. They're more durable, resistant to chemicals and stains, and they'll give you a better-looking finish. Do your research and choose products from reputable manufacturers. Read the labels carefully and follow the instructions to a T.

Here's a quick comparison of epoxy grades:

Grade	Durability	Chemical Resistance	Cost
Low	Fair	Poor	Low
Medium	Good	Fair	Moderate
High	Excellent	Excellent	High

Repairing Peeling and Lifting Epoxy Floors

Epoxy floors are tough, but sometimes they peel or lift. This usually happens because of moisture, bad prep work, or just old age. Don't worry, you can fix it! Here's how.

Assessing the Damage

First, figure out how bad the peeling is. Is it just a small spot, or is a big area coming up? Check for moisture underneath the lifting epoxy. If it's damp, you'll need to dry it out completely before you do anything else. Use a moisture meter if you have one. Knowing the extent of the damage helps you decide if it's a DIY job or time to call in the pros.

Surface Preparation Techniques

This is the most important step! You can't just slap new epoxy on top of the old stuff. You need to grind down the edges of the peeling area so the new epoxy blends in smoothly. Use a concrete grinder with a diamond grinding wheel. Make sure to feather the edges, so there aren't any sharp lines. Clean the area really well with a shop vac to remove all the dust and debris. If you skip this step, the new epoxy won't stick, and you'll be back to square one.

Grind down the edges of the peeling epoxy.
Feather the edges for a smooth transition.
Thoroughly clean the area with a shop vac.

Reapplication of Epoxy

Now for the fun part! Mix your epoxy according to the manufacturer's instructions. Use a high-quality epoxy that's designed for floors. Apply a thin coat of epoxy to the prepared area. Use a squeegee or roller to spread it evenly. If you're using flakes or other decorative elements, now's the time to add them. Let the epoxy cure completely before you walk on it. This might take a few days, so be patient. Once it's cured, you'll have a seamless, durable repair.

Proper surface preparation is key to a successful epoxy repair. Without it, the new epoxy won't bond correctly, and you'll end up with more peeling and lifting down the road. Take your time and do it right the first time.

Fixing Bubbles and Blisters in Epoxy

Bubbles and blisters in epoxy flooring can be a real eyesore, not to mention a sign that something went wrong during the application. They happen when air or moisture gets trapped beneath the epoxy as it cures. Luckily, they're often fixable, though the approach depends on the severity and cause.

Identifying the Source of Air Trapped

First things first, you gotta figure out why those bubbles are there in the first place. Common culprits include:

Improper mixing: If you whip the epoxy too vigorously, you'll introduce air. Mix slowly and deliberately.
Damp substrate: Moisture rising from the concrete can create bubbles as the epoxy cures. Always check the moisture levels before you start.
Porous surface: Air can be released from the concrete itself, especially if it wasn't properly sealed. A good primer is key.
Temperature fluctuations: Big temperature swings during curing can cause air to expand and contract, forming bubbles. Try to maintain a stable environment.

It's important to note that sometimes, even with the best prep work, bubbles can still appear. Don't panic! It doesn't always mean you messed up. It just means you need to address them.

Methods to Remove Bubbles

Okay, so you've got bubbles. Now what? Here are a few ways to get rid of them:

Heat gun: A quick pass with a heat gun can pop surface bubbles before the epoxy fully cures. Be careful not to overheat the epoxy, though.
Spiked roller: These rollers are designed to release trapped air as you apply the epoxy. They're great for preventing bubbles in the first place, but can also help with small ones that appear during curing.
Needle or pin: For individual bubbles, you can carefully pop them with a needle or pin. This works best when the epoxy is still wet. After popping, the epoxy should self-level, but you might need to gently smooth it out.

Reapplying the Epoxy Coating

If the bubbles are widespread or deep, sometimes the best solution is to reapply the epoxy. This might sound drastic, but it can give you the best results. Here's the general process:

Grind down the existing epoxy: Use a concrete grinder to remove the bubbly layer. This creates a clean, even surface for the new epoxy to bond to.
Clean the surface thoroughly: Remove all dust and debris. You might even want to use a vacuum to make sure everything is spotless.
Apply a new coat of epoxy: Follow the manufacturer's instructions carefully, paying close attention to mixing ratios and application techniques. Consider using a quality primer to prevent future issues.

Problem	Solution
Surface Bubbles	Heat gun or spiked roller
Individual Bubbles	Needle or pin
Widespread Bubbles	Grinding and reapplication of epoxy

Dealing with bubbles can be frustrating, but with a little patience and the right techniques, you can get your epoxy floor looking smooth and professional. And remember, proper preparation is always the best defense!

Addressing Discoloration and Staining

Epoxy floors, while durable, aren't immune to discoloration and staining. Spills, sunlight, and certain chemicals can all leave their mark. The good news is that many of these issues can be addressed with the right techniques and products. Let's explore how to keep your epoxy floor looking its best.

Cleaning Techniques for Stains

The first step in addressing stains is identifying the culprit. Different stains require different approaches. For example, oil-based stains might need a degreaser, while water-based stains might respond to a simple soap and water solution. Always test your cleaning solution in an inconspicuous area first to ensure it doesn't damage the epoxy. Here's a quick guide:

Mild Stains: Warm water and dish soap. Use a soft mop or cloth.
Grease and Oil: Degreaser or specialized epoxy cleaner.
Rust Stains: Commercial rust remover (follow product instructions carefully).

It's important to act quickly when a spill occurs. The longer a substance sits on the epoxy, the more likely it is to stain. Wipe up spills immediately with a clean cloth or paper towel.

Using Sealants to Prevent Staining

Applying a sealant is a great way to protect your epoxy floor from future stains. Sealants create a barrier that prevents liquids and other substances from penetrating the epoxy surface. Look for sealants specifically designed for epoxy floors. Regular sealing are crucial for improving your concrete’s durability and appearance. Here's what to consider:

Type of Sealant: Water-based or solvent-based. Water-based are generally easier to apply and have lower VOCs.
Application: Follow the manufacturer's instructions carefully. Usually involves cleaning the floor, applying the sealant in thin, even coats, and allowing it to dry completely.
Frequency: Reapply sealant every 1-2 years, or as needed, depending on traffic and exposure to staining agents.

Recoloring Options for Epoxy Floors

If your epoxy floor has severe discoloration or staining that can't be removed with cleaning or sealants, recoloring might be an option. This involves applying a new layer of epoxy with a different color or finish. This is a more involved process than simple cleaning, but it can restore your floor to its original beauty or give it a completely new look. Here are some things to keep in mind:

Surface Preparation: The existing epoxy floor needs to be properly prepared before applying a new coat. This usually involves sanding or grinding to create a smooth, even surface.
Epoxy Type: Choose an epoxy that is compatible with the existing floor. Consult with a professional to ensure the best results.
Professional Installation: Recoloring epoxy floors is often best left to professionals, as it requires specialized equipment and expertise. Discoloration or stains are easy to spot, so any discoloration is easy to spot.

Dealing with Cracks in Epoxy Flooring

Identifying the Type of Crack

Cracks in epoxy floors aren't just unsightly; they can signal bigger problems underneath. Before you even think about fixing them, you need to figure out what kind of crack you're dealing with. Is it a hairline fracture, a wider, deeper crack, or something structural? Hairline cracks are usually surface-level and easier to fix. Deeper cracks might mean issues with the concrete slab below. Knowing the type of crack is the first step to a lasting repair.

Repairing Small Cracks

For those smaller, hairline cracks, you might be able to handle the repair yourself. Here's a basic rundown:

Clean the crack thoroughly. Get rid of any loose debris, dirt, or old epoxy. A vacuum and a small brush can help.
Use an epoxy crack filler. You can find these at most hardware stores. Make sure it's compatible with your existing epoxy floor.
Apply the filler carefully, following the manufacturer's instructions. Usually, you'll want to overfill the crack slightly.
Let it cure completely. This might take a day or two, depending on the product.
Sand it down. Once it's cured, sand the filled area until it's smooth and level with the surrounding floor. Start with a coarser grit sandpaper and move to a finer grit for a smooth finish.

Addressing Larger Structural Issues

If you're dealing with big, wide cracks, or cracks that seem to be growing, you've probably got a structural problem. This isn't a DIY situation. You'll need to call in a professional who can assess the underlying issue. It could be anything from a settling foundation to water damage. Ignoring these structural issues will only lead to bigger, more expensive problems down the road.

Ignoring structural cracks in your epoxy floor can lead to significant problems. Water can seep in, causing further damage to the concrete slab and potentially compromising the integrity of your entire flooring system. Addressing these issues promptly is crucial for maintaining the longevity and safety of your floor.

Maintaining Your Epoxy Floor After Installation

Daily Cleaning Routines

Keeping your epoxy floor clean doesn't have to be a chore. Regular sweeping is key to removing loose dirt and debris that can scratch the surface. For deeper cleaning, use a soft mop with warm water and a mild detergent. Avoid harsh chemicals or abrasive cleaners, as they can dull or damage the epoxy finish. Quick cleanups of spills are also important; epoxy is stain-resistant, but it's best to address messes promptly.

Avoiding Common Mistakes

Several common mistakes can shorten the lifespan of your epoxy floor. One big one is dragging heavy objects across the surface – always lift and carry. Another is using the wrong cleaning products. Acidic or abrasive cleaners can damage the finish. Also, be careful with sharp objects that could scratch the epoxy. Consider using mats in high-traffic areas to provide extra protection. Proper surface preparation techniques are also important.

Annual Inspections and Touch-Ups

Once a year, take some time to thoroughly inspect your epoxy floor. Look for any signs of wear, such as small cracks, chips, or peeling. Addressing these issues early can prevent them from becoming bigger problems down the road. Small chips can often be repaired with a touch-up kit. If you notice larger areas of damage, it's best to consult with a professional. Regular inspections and timely touch-ups will help maintain the enhanced aesthetic appeal of your floor for years to come.

It's easy to forget about maintenance, but a little effort goes a long way. Think of it like this: a well-maintained epoxy floor not only looks better but also lasts longer, saving you money in the long run. Simple habits, like using mats and cleaning up spills quickly, can make a big difference.

Choosing the Right Epoxy for Your Needs

Choosing the right epoxy for your flooring project can feel overwhelming, but it's a step you can't skip. The type of epoxy you select will directly impact the floor's performance, appearance, and longevity. Let's break down the key considerations to help you make an informed decision.

Types of Epoxy Flooring

There are several types of epoxy flooring available, each with its own set of characteristics and best-use cases. Understanding these differences is key to selecting the right one for your specific needs. Here's a quick rundown:

Solid Epoxy: Known for its exceptional strength and resistance to chemicals, solid epoxy is a popular choice for garages and industrial settings. It's durable and can withstand heavy loads.
Water-Based Epoxy: A more user-friendly option, water-based epoxy is easier to apply and offers a thinner finish. It's often preferred for DIY projects and those seeking a cost-effective solution. However, it might not be as durable as other types.
Solvent-Based Epoxy: This type offers a balance between solid and water-based epoxies. It contains solvents that give it moderate thickness and make it easier to apply than solid epoxy. It provides good durability and chemical resistance.
Epoxy Mortar: The toughest of the bunch, epoxy mortar floors are made of 100% solid epoxies and graded or quartz sand. They're typically used in heavy-duty industrial environments where maximum durability is required. If you need concrete repair materials, this might be the way to go.
Graveled Epoxy: This type is often used for decorative purposes, adding intricate details and designs to floors. While visually appealing, it still offers good durability.

Factors to Consider for Selection

Choosing the right epoxy isn't just about the type; several factors should influence your decision:

Intended Use: What will the floor be used for? A garage floor needs a different epoxy than a showroom floor. Consider the amount of traffic, potential for spills, and weight it needs to support.
Budget: Epoxy flooring costs can vary widely depending on the type of epoxy, the size of the area, and whether you hire professionals or do it yourself. Set a budget beforehand to narrow down your options.
Substrate Condition: The condition of your existing floor is important. Some epoxies are more forgiving of imperfections than others. Proper surface preparation is always important, but some epoxies can handle minor cracks or unevenness better.
Aesthetic Preferences: Epoxy flooring comes in a wide range of colors, patterns, and finishes. Consider the overall look you want to achieve and choose an epoxy that matches your style.
DIY vs. Professional Installation: Are you planning to install the epoxy yourself, or will you hire professionals? Some epoxies are easier to work with than others, making them more suitable for DIY projects. Keep in mind that professional installation ensures a high-quality result.

Consulting with Professionals

When in doubt, consulting with epoxy flooring professionals in San Antonio is always a good idea. They can assess your specific needs, recommend the best type of epoxy for your project, and provide expert installation services. They can also help you understand the long-term benefits of properly maintained epoxy floors.

Choosing the right epoxy can seem like a lot, but taking the time to research and consider your options will pay off in the long run. A well-chosen and properly installed epoxy floor can provide years of durable, beautiful, and low-maintenance performance.

Understanding the Cost Implications of Repairs

Budgeting for Repairs

Okay, so your epoxy floor isn't looking its best. Before you panic, let's talk money. Figuring out a budget is the first step. Start by assessing the damage. Is it a small crack, some peeling, or a full-blown disaster? This will heavily influence the cost. Remember to factor in not just materials, but also potential tool rentals (like grinders or mixers) and safety gear. Don't forget to add a little extra for unexpected issues – because, trust me, there's always something.

Cost of Professional Services

Thinking about calling in the pros? Smart move, especially if you're dealing with a big problem. But professional epoxy flooring installation comes at a cost. Expect to pay more for experienced contractors who offer warranties. The price will depend on the size of the area, the extent of the damage, and the type of epoxy needed. Getting several quotes is crucial. Make sure each quote breaks down the costs of labor, materials, and any additional services.

DIY vs. Professional Repair Costs

DIY or pro? That's the question. DIY can save you money upfront, but it also comes with risks. If you mess up, you could end up spending more to fix your mistakes. Professional repairs cost more initially, but they often come with guarantees and can prevent future problems. Here's a quick comparison:

Factor	DIY Repair	Professional Repair
Initial Cost	Lower	Higher
Skill Required	Moderate to High	Low (you're paying for their skill)
Time Commitment	Significant	Minimal
Risk of Error	High	Low
Warranty	Usually None	Often Included
Long-Term Cost	Potentially Higher (if mistakes are made)	Potentially Lower (due to quality and warranty)

Ultimately, the best choice depends on your budget, your skills, and your tolerance for risk. If you're unsure, it's always a good idea to consult with a professional to get their opinion. They can assess the damage and give you a realistic estimate of the costs involved. Choosing the right path can save you money and headaches in the long run.

Finding Reliable Epoxy Flooring Services in San Antonio

Finding the right people to install or repair your epoxy floors can feel like a big task. You want someone who knows what they're doing, charges a fair price, and will actually show up when they say they will. San Antonio has plenty of options, but how do you sort through them all?

Researching Local Contractors

Start by doing some digging online. A simple search for "epoxy flooring San Antonio" will give you a long list of companies. Don't just pick the first one you see. Look at their websites. Do they seem professional? Do they list their services clearly? Check if they specialize in epoxy floor coating for residential, commercial, or industrial spaces, depending on your needs. Also, see how long they've been in business. Experience counts for a lot in this field.

Checking Reviews and References

Reviews are your friend. Sites like Google, Yelp, and the Better Business Bureau can give you a sense of what other customers think. Look for patterns. A few bad reviews might be outliers, but if you see a lot of people complaining about the same thing, that's a red flag. Don't hesitate to ask contractors for references. A reputable company should be happy to provide you with a list of past clients you can contact. Actually call those references and ask about their experience. Were they happy with the work? Was the contractor responsive and professional?

Getting Quotes and Estimates

Once you've narrowed down your list, get quotes from at least three different contractors. Make sure they come to your property to assess the job before giving you an estimate. A good contractor will take the time to understand your specific needs and explain the process in detail. Be wary of estimates that seem too good to be true; they often are. Get everything in writing, including the scope of work, materials to be used, timeline, and payment schedule. This will protect you if any issues arise down the road.

It's easy to get overwhelmed by all the choices, but taking the time to do your research will pay off in the long run. Don't be afraid to ask questions and trust your gut. A good contractor will be patient, informative, and willing to work with you to find the best solution for your needs. Remember, a well-installed and maintained epoxy floor can last for years, so it's worth investing the time and effort to find the right professional for the job.

Long-Term Benefits of Properly Maintained Epoxy Floors

Increased Durability and Longevity

Properly maintained epoxy floors offer exceptional durability, ensuring they last for years. I've seen some last for decades! It's not just about the initial installation; it's about keeping up with it. Think of it like a car – you can't just buy it and expect it to run forever without oil changes and tune-ups. Epoxy is the same way. Regular care means fewer repairs and a longer lifespan. This makes it a smart investment for any space, whether it's a garage, a business, or even a home.

Enhanced Aesthetic Appeal

Let's be honest, nobody wants a floor that looks like it's been through a war. A well-maintained epoxy floor keeps its shine and color. It's like the difference between a faded photograph and a freshly printed one. Regular cleaning and the occasional touch-up can make a huge difference. Plus, a clean, shiny floor just makes a space feel more inviting and professional. It's a small thing that can have a big impact on the overall look and feel of a room. You can even customize your floor with different colors and patterns to create a unique look. For example, you can choose a solid color, or you can add flakes or metallic pigments to create a more decorative finish. The possibilities are endless!

Improved Safety and Functionality

Epoxy floors aren't just about looks; they're about safety too. A properly maintained epoxy floor is slip-resistant and easy to clean, which reduces the risk of accidents. Spills are inevitable, but with epoxy, they're easy to wipe up. Plus, epoxy can protect the underlying concrete from damage, which can prevent costly repairs down the road. It's a win-win situation. Think about it – a smooth, even surface is much safer than a cracked, uneven one. And when you're talking about a garage or a workshop, safety is always a top priority. Consider garage floor epoxy for your home.

I've found that the key to long-lasting epoxy floors is consistency. A little bit of maintenance on a regular basis is much easier than dealing with major repairs later on. It's like brushing your teeth – it's a small thing that makes a big difference in the long run.

Here's a simple maintenance schedule I try to follow:

Daily: Sweep or vacuum to remove dirt and debris.
Weekly: Mop with a mild detergent.
Monthly: Inspect for any signs of damage and address them promptly.

Wrapping It Up

So, there you have it. Epoxy flooring can be a great choice, but it’s not without its issues. Whether it’s peeling, bubbling, or just looking dull, these problems can usually be fixed with a bit of effort. Remember, keeping your floor clean and addressing issues early can save you a lot of headaches down the road. If you’re in San Antonio and need help, don’t hesitate to reach out to a local pro. They can help you get your floor back in shape and looking good as new. Just take it one step at a time, and you’ll be fine.

Frequently Asked Questions

What are common problems with epoxy flooring?

Some common issues include peeling, bubbles, discoloration, and cracks.

What causes epoxy floors to peel?

Peeling often happens due to poor surface preparation or moisture trapped underneath.

How can I fix bubbles in my epoxy floor?

You can remove bubbles by identifying where the air is trapped and then reapplying the epoxy.

Is it hard to maintain epoxy flooring?

No, it’s easy to maintain. Just clean up spills quickly and do regular cleaning.

Can epoxy flooring get stained?

Yes, if spills are left too long, they can cause stains and discoloration.

How do I choose the right epoxy for my floor?

Consider the type of room, the amount of traffic, and whether you want a specific color or finish.

What should I do if my epoxy floor cracks?

Identify the type of crack and repair small ones with epoxy filler or consult a professional for larger issues.

How much does it cost to repair epoxy flooring?

Costs vary based on damage and whether you hire a professional or do it yourself.